Wednesday, September 10, 2008

How to Make A Ball Jointed Doll - Part 5



How to Make A Ball Jointed Doll





Temporary Jointing

Now joint all the parts temporarily to check and see the balance.

The length and strength of the elastic loops depend on dolls.

For legs, cut two pieces of elastic measuring from ankle to neck hole.

For arms, cut a piece of elastic measuring from wrist to wrist.

Tie up the end of the elastics together to form loops.

Using a strong piece of wire with a bent, draw the elastic loops through each parts, and attach to the hooks at each end.



Fix all the parts and check all the joints to see if they can be moved smoothly.

The elastics must not be too slack at the same time.


Coating Foundation

Use "gohun", the ground shell powder used for Japanese traditional dolls, to coat as foundation.

Modeling paste (available at drawing materials shop) can be used in place of it.

Dilute some amount of modeling paste with the same amount of water.

Put paste on the surface of all parts with a brush carefully, don't rub the surface.

Finish all parts, then dry up, and do it 3 or 4 times.


Here a lump of styrofoam is used for stand.

A heavy wood plank or anything can be used.

Finish the paste coating.


After dry up, smooth all the surface with sand papers perfectly.

Curve the features out with a cutter and fix the details.


And you are DONE! Enjoy fixing!


===============================================
Also see How to assemble the ball jointed doll




3 comments:

Anonymous said...

Hello Adeline. Are you interested in making a custom doll like the one you made in this? You will not need to paint it or add hair, etc, just make the body parts and make sure they fit. That's it. I will dress and paint it myself. If you are interested, please email me at woohandbags [at] yahoo.com

Anonymous said...

Gracias! Has sido de gran ayuda. Pronto comenzare mi primer proyecto BJD y este tutorial es fantástico. @angela m

Anonymous said...

Can you win these